Clearblue Digital Pregnancy Test With Weeks Indicator 1 Unit

The only test that has all the answers you are looking for, including how many weeks ago you conceived. Introducing the Clearblue Digital Pregnancy Test with Conception Indicator, the most advanced home pregnancy test ever made. That is because it is the only test that has not one, but two hormone-measuring sensors, with digital reading, giving you unmistakably clear results in words. It is over 99% accurate in detecting whether or not you are pregnant from the day your period is due and can be used 4 days before your period is due.

Direction for Use:

1. Place absorbent sampler pointing downwards in your urine stream for 5 seconds only.
2. Or you may collect a sample of urine in a clean & dry container, place absorbent sampler pointing downwards in the urine for 20 seconds only.
3. Replace the cap and lie the test stick flat.
4. The wait symbol will flash to show the test is working.
5. When the wait symbol stops flashing, your result ('pregnant' or 'not pregnant' and number of weeks pregnant) will appear within 1-3 minutes.
6. Results will remain on display for 24 hours.

Caution:

• Home pregnancy test. Use once. For in vitro diagnostic use only. Not for internal use.
• Keep out of the reach of children.
• Store at 2°C - 30°C (36°F - 86°F). Allow to reach room temperature for 30 minutes prior to testing if stored refrigerated.
• Do not use if the foil wrapper containing the test stick is damaged or if the test stick is past its expiration date.
• This product incorporates a battery. Dispose of it in accordance with local regulations.
• Before disposing of your test, remove the battery from the test stick:
  • Insert a coin into the slot at the end and twist to break open the back of the test stick.
  • Remove the battery and dispose of it according to the appropriate recycling scheme.
• Do not disassemble, recharge, or dispose of the battery in fire. Do not swallow. Keep away from children.
• Dispose of the rest of the test stick according to the appropriate recycling scheme for electrical equipment.
• Do not dispose of electrical equipment in fire.
• This device meets the electromagnetic emissions requirements of EN61326. Its electromagnetic emission is low, and interference from other electrically driven equipment is not expected.
• This test should not be used in close proximity to sources of strong electromagnetic radiation (e.g., mobile phones), as these may prevent the test from working correctly.
• To avoid electrostatic discharge, do not use the test in a very dry environment, especially one where synthetic materials are present.